Opening The Door To A Beautiful Garage

Despite being the first room that most householders see when they enter their houses, the storage is most likely the most ignored and least talked-about room when it comes to residence improvement.

The typical bland and stained concrete storage floor suffers from years of heavy foot and vehicle traffic. Fortunately, you'll find techniques to make even essentially the most beat-up garages look great-and home owners can do it themselves. Professional concrete epoxy coatings can revitalize a garage flooring, make storage cleanup less difficult and assist prevent the need to have for future pricey floor repairs. Here's how to restore your floor.

Tools Of your Trade

To restore your garage floor, property owners will need Quikrete Epoxy Garage Floor Coating Kit (including instructional DVD). This all-in-one, easy-to-use kit beautifies and protects concrete storage floors from hot tires, gasoline, oil, scuffs and wear and tear which has a coating twice as strong as concrete. You'll also need a flat, stiff bristle brush, plastic watering can, garden hose, push broom, a 3/8-inch roller with extension handle, roller tray and a 2-inch, solvent-resistant brush.

What To Do

Careful preparation of the garage flooring is essential for positive end results. Using a push broom, sweep complete location to remove all dust and debris.

Wet concrete floor, add Bond-Lok concentrate to three quarts of water in watering can to degrease, clean and etch in one step.

Operating in sections, sweep watering can back and forth while pouring to ensure proper coverage. Use bristle brush to thoroughly scrub stains and spread cleaner.

Once every section is cleaned, rinse away dirt having a garden hose. Repeat approach right up until total floor has been cleaned, following having a final hose down of your storage.

Wait till concrete is completely dry (at least 4 hrs) just before epoxy application.

Combine Component A of product with Portion B and permit epoxy to sit for 30 minutes before use.

Starting at the back in the storage, spread epoxy coating in smooth, even strokes across a 2-by-6-foot location.

If utilizing color flakes, they must be applied to wet paint. After covering every single 2-by-6-foot section with the epoxy coating, lightly sprinkle flakes onto concrete.

Continue procedure, working in sections, until finally total garage floor is covered.

Enable epoxy to harden for 12 to 24 hrs before light foot traffic and 72 hours for automobile traffic.